AUTONET TV

When "Oh, no!" Turns Into, "All right!"

Things we don't expect happen to our vehicles. And let's face, no one really wants to spend money on an unexpected repair. But if you are putting off going to your vehicle repair facility because you're dreading bad news, you might just be putting off some good news.

There was one minivan driver who'd had the same van for years and never had a problem with the power sliding doors.  Then one day, the electrical switches in the door pillars stopped working.  The key fob would still open them, but the door switches wouldn't do a thing.

Of course, the van driver feared the worst: an electrical problem, a major computer failure, mice chewing up the wires.  So, he put off going into the repair facility for a couple of months.  One day, it was time for his regular oil change and the service advisor asked him if there was anything else going on with the van.  The owner mentioned the door problem but said he didn't want to spend a fortune on it.

He waited for his van, and it wasn't long before the service advisor came out with good news. The doors weren't working because a switch on the overhead console had been turned off.  (It was a safety feature to allow parents to disable them.) The owner had accidentally switched it when he was unloading the van.  It was the first thing the technician had checked. Flip the switch back and all was working as usual.

Another example? A mother was driving a minivan with her two kids inside on a hot day when she felt the front end shaking violently as she drove down the road. Fearing something major had broken in the van (and fearing for the safety of her kids), she pulled into a fast-food restaurant parking lot and started to look underneath to see if it was anything obvious she could see.

She couldn't see any broken parts, but she also didn't feel safe getting back in the van with her kids.  So, she called her local service facility and asked if they could send someone to look at it.  When the technician arrived, he took it for a test drive on the same road on which she'd described having the trouble.  Then he put her van up on the lift.  His conclusion?  Nothing was wrong with her van.  It was the street she was driving on.  Crews repairing it had left the surface full of potholes, and that was causing her rough ride.

Ultimately, what these two drivers feared would be an expensive trip to the shop resulted in each driver getting different news than they had expected.  One learned something new about his vehicle.  The other?  Well, the technician saw that her tires were badly worn and convinced her to get them replaced, perhaps preventing an accident and giving peace of mind for a mom with two kids.

The New Blade in Town

If your windshield wipers are streaking and chattering when you turn them on in the rain or snow, it's time for a little "blade renewal." And when it comes to new wiper blades, there are some new designs that are worth a look.

One of the latest is called the beam blade.  It's different than conventional blades you might be used to.  Instead of a metal frame and a rubber blade that slides in the frame on a track, the beam blades have an enclosed spring-steel band that allows the rubber wiper to conform to the windshield glass shape much more tightly. 

There are some key advantages to beam blades, which is why many vehicle manufacturers are making them standard on their latest models.  For one thing, they work well in all weather conditions, including the heat of summer and the icy, snowy cold of winter.  Since there is no separate frame, snow and ice can't form in gaps like conventional wipers and prevent the blade from clearing your windshield. 

Many beam blades also have a mini "wing" on them. It uses the air moving over your windshield to create a little extra downward pressure that presses the blade even more tightly against the glass.  The faster you go, the more firmly the blade can sweep off moisture. That means a clearer view. 

Beam blades are an upgrade that can add to your vehicle's overall safety with that increased visibility.  The best thing is to discuss wiper blades with your service advisor to see if it's a good choice for you and your vehicle, keeping in mind the type of driving you do and the climate you live in.  Remember that when it comes to wipers, it's important that you are using blades that are designed to fit your vehicle and that they are installed correctly. 

Brake World
1213 N State Rd 7
Royal Palm Beach, FL 33411
561-798-3949
http://www.westpalmbeachautorepairs.net

It Wears on You (Tire Rotation)

If someone told you there was a fairly inexpensive way to improve your vehicle's handling, fuel economy and extend the life of your tires, you'd probably ask, "What do I have to do?" The answer is to rotate your tires.  But you have to do it regularly.

A lot of drivers think skipping tire rotation is a way to save money.  But when you don't rotate your tires, they will almost certainly wear unevenly.  That's because when your tires touch the surface of the road, the friction and traction causes miniscule parts of the rubber to come off.  And that process isn't exactly the same on each corner of your vehicle.  Some vehicles have the drive wheels in the front, some in the rear and some on all wheels.

Rotating your tires at regular intervals minimizes the differences in the way the tires wear.  The amount and pattern will be spread out equally if your tires spend time at all different positions.  The more even the wear, the more consistent traction, handling and braking will be.  All four tires will last longer this way, and when it is time to replace your tires, they'll all be worn out the same so you can replace all four with the same model tire.

Some people who choose not to rotate their tires find that one or two will wear much faster than the others, and often they'll replace just the worn ones.  While you can find similar tires, they won't all be the same and will certainly not have the same amount of wear. 

There are different tire rotation patterns depending on several factors: front-wheel drive, rear-wheel drive, all-wheel drive, directional tires/wheels, different sized wheels/tires on front and rear axles.  Also keep in mind that when your tires are new, some tire manufacturers require you to rotate them or else they won't honor the warranty. 

Your manufacturer recommends intervals for tire rotation, so it's best to follow their suggestion.  Your vehicle service facility can advise you when you need to get your tires rotated.  And many facilities include free tire rotation for as long as they're on your vehicle if you buy your tires at their shop.

Brake World
1213 N State Rd 7
Royal Palm Beach, FL 33411
561-798-3949
http://www.westpalmbeachautorepairs.net

Not-So-Common Sense (Sensor Failures)

So your vehicle won't start.  What's the first thing that comes to mind?  Battery dead? Starter motor worn out? Out of gas?  Well, those are all reasons that make sense.  But your vehicle may be refusing to start because one of its computers is being warned that to do so might damage it.  Here's how that works.

You have lots of computers in your vehicle.  They need to know the status of things so there are several sensors monitoring various things going on.  These sensors send information to the computers that adjust the fuel and air mixture so you don't waste fuel.  They know when things aren't quite right and prevent you from starting your engine if that's going to damage it. 

Other sensors make sure the coolant is the right temperature, check to see you are not polluting the air and make sure other electronic components are performing their tasks correctly.

Here's an example of a sensor doing its job.  Your engine needs oil to lubricate metal components so the friction doesn't damage them.  Your engine has an oil pressure sensor that tells a computer called the Electronic Control Unit (ECU) if things are good to go or if there's something wrong, maybe the oil pressure is too low to keep things lubricated.  If it is, it gives a signal for the vehicle not to start, protecting the engine. 

Of course, the sensors can go bad, too, with some of the same results.  And so someone has to figure out if it's the sensor that's failed or if it really has detected a problem.  That is the challenge for technicians with specialized equipment to decipher the signs.  If a bad sensor is found, it may need to be replaced.  Sometimes a thorough cleaning can do the trick.  In either case, your service facility can track down the problem and get you back on the road.  Makes sense, doesn't it?

Brake World
1213 N State Rd 7
Royal Palm Beach, FL 33411
561-798-3949
http://www.westpalmbeachautorepairs.net